If you cancel the Auto MCACC setup at any time, the receiver automatically exits and no settings will be made. Press SETUP at any time to exit the System Setup menu.Use and ENTER on the remote control to navigate through the screens and select menu items. The System Setup menu appears on your TV. Otherwise, place the microphone at ear level using a table or a chair.Ĥ Press RECEIVER on the remote control, then press the If you have a tripod, use it to place the microphone so that it's about ear level at your normal listening position. Make sure there are no obstacles between the speakers and the microphone. (There is no need to conduct Auto MCACC setup every time the Speaker System setting is changed.)Ģ Switch the TV input so that it connects to the receiver.ģ Connect the microphone to the MCACC SETUP MIC jack When both the surround back speaker and the front height speaker are connected, conduct Auto MCACC setup twice: once with the Speaker System setting is in Surr.Back and once with the Speaker System setting is in Height.Before using the Auto MCACC setup, the iPod USB input should not be selected as an input source.The Auto MCACC setup will overwrite any existing speaker settings you've made.The test tones used in the Auto MCACC setup are output at high volume.After you have set up the microphone provided with your system, the receiver uses the information from a series of test tones to optimize the speaker settings and equalization for your particular room. The Auto Multi-Channel Acoustic Calibration (MCACC) setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distance, and tests for both channel delay and channel level. The demo mode is canceled automatically when the Auto MCACC setup is performed (see below).Īutomatically setting up for surround sound (MCACC).For details, see The FL Demo Mode menu on page 41.
The display on the front panel shows various information (demo displays) when the receiver is not operating.
0 kommentar(er)
